ASSEMBLING SCAFFOLDING:-
- First step is to Place two 5 RF vertically and parallelly to each other( RF means Rail Frame )
- Then Connect two Straight Brace with spring loaded snappers black in color
- Our next step is to Connect the Cross Brace with spring loaded snappers orange in color
- This is the main step for the scaffolding because now we are going to Fix the four wheel assembly along with the C-clamp which hold the materials erect
- Again place two 5 RF vertically and parallel to each other(it is connect to the already placed 5RF)
- Now fix the spring clamp and connect the cross brace (this cross brace used to support the frame and spacing
- Then fix the platform assembly
- Fix GRF on both side vertically and horizontally with spring clamp
- Finally we connect four straight brace
- Now our scaffolding assembling is fully completed
DIS MANTLING SCAFFOLDING:-
- First step is to remove the top most four straight brace
- Then remove the clamp and GRF
- Next step is to remove the platform assembly
- Then remove the cross brace one by one
- Then remove the Single width 5RF along with the spring clamp
- Now we should remove the wheel so first remove the clamp which is used to connect with the material and then remove the wheel.
- Next remove the remaining cross brace one by one
- As the final step remove the two 5 RF frame
- Now our scaffolding disassembling is fully completed
