Fire Sprinkler System Price
Fire Safety Components
A fire sprinkler system is a network of pipes that are installed in a building to provide automatic fire protection. The system is designed to detect and extinguish fires before they have a chance to spread, reducing the risk of damage and injury.
| Model | Fire Sprinkler Pendent |
| Working Condition | Indoor |
| Response | Immediate |
| Temperature Rating | 57 Degree C |
| Weight | 56 g |
| Rating |
Fire Sprinkler Systems Work
Fire sprinkler systems work by detecting heat and activating the sprinkler heads in the affected area. When a fire breaks out, the heat from the flames causes the sprinkler head to open, allowing water to flow out and extinguish the fire. The sprinkler heads are designed to activate only in the area where the fire is present, preventing unnecessary water damage to the rest of the building.
Types of Fire Sprinkler Systems
- Wet Pipe System
- Dry Pipe System
- Pre-action System
- Deluge System
Types of Fire Sprinkler Systems
Fire Safety Equipment
There are several types of fire sprinkler systems, each designed for specific types of buildings and environments.
| Model | Fire Sprinkler |
| Working Condition | Indoor |
| Response | Immediate |
| Temperature Rating | 57 -108 Degree C |
| Weight | 56 g |
| Rating |
Fire Sprinkler Wet Pipe System
A wet pipe system is the most common type of fire sprinkler system. It is a simple system that consists of pipes filled with water and connected to sprinkler heads throughout the building. When a fire is detected, the heat activates the sprinkler head, and water is immediately released.
Dry Pipe System
A dry pipe system is used in buildings where the temperature can drop below freezing, such as unheated warehouses. The pipes are filled with pressurized air or nitrogen, and the sprinkler heads are filled with water. When a fire is detected, the air or nitrogen is released, and the water flows out to extinguish the fire.
Pre-action System
A pre-action system is used in buildings where there is a high risk of water damage, such as data centers. The system is similar to a dry pipe system, but it requires two triggers to activate the sprinkler heads. First, the fire detection system must detect a fire, and then the sprinkler heads will open when a second trigger is activated, such as a heat or smoke detector.
Deluge System
A deluge system is used in high-risk areas, such as chemical storage facilities or power plants. The system consists of open nozzles that are attached to a piping system that is connected to a water supply. When a fire is detected, all of the nozzles release water simultaneously, flooding the area with water.